—— The method to open ADB on the smart set-top box is to open startadbd after it appears. By translating, you should know this is the command to enable adb permissions. Note that it is stardadbd, not startadb. At this point, you can enable the desktop version of the Wukong remote to search for the box, which will be introduced later.
—— The general method to enter: Settings - Developer Options - Network ADB Debugging - Enable. Of course, different models of boxes or smart TV products will have different methods, different names, and different operation steps, but the overall idea is still to enter the system settings and find the switch, which will be discussed later.
—— N1 TV box, Android system, install a command terminal, and you can also reboot update. No need for adb.
—— 1. Enter the settings of the TV box, go to advanced settings, there is a password: Mobile is 10086, Telecom is 10000, Unicom is 10010 (also set to check and record your device's IP address, which will be useful later). 2. Generally speaking, the operation and maintenance adb option is not available, which will be introduced later.
—— The method to open ADB is to enter the box's settings --- General Settings --- System Information --- Copyright Statement --- press the remote control's directional keys left and right four times, and then you can open the box's ADB. However, if the box restarts, you will have to repeat this operation to open it (successfully).
—— (2) Open the computer's run, enter cmd to run, then enter the connection code adb connect 192.168.X.X, this is the code to connect to the set-top box. adb devices lists connected devices. adb install C:\Users\Administrator\Desktop\ADB\dbzm.apk, what else?
—— Connect via serial cable, enter in the serial port: start adbd to open adb. Tianyi TY1608 connects via serial cable, enter in the serial port: start adbd, that's all.
—— 1. Check if ADB on the set-top box is already open. 2. Follow my tutorial "Four-3" steps [Enter cd d:\root and press Enter ("d:\root" is the directory from step 1, change according to your extraction directory)] After completing this step, enter .\adb connect set-top box IP address (as will be discussed later).
—— 2. Enter the settings of the ZTE box, the general password is: 6321 or the operator's number (10086, 10000, 10010), connect to Wi-Fi (the set-top box and computer are on the same network segment), then select operation and maintenance debugging - open ADB debugging, and then run the ADB password calculator, corresponding to what else?
——————————————————————————————————————————————————————————————
Frequently encounter various connection issues with boxes, so here is a summary of the methods to open adb for future reference.
Telecom
Summary of adb connection methods
Province Manufacturer Set-top Box Model adb Connection Method
Guangdong Telecom Huawei Q21 Use Huawei stbId tool, turn off and then turn on remote connection on the set-top box to get the password, then input the connection in the tool, open the remote connection switch, and connect adb again.
Tianyi
Press the info key plus 2323 to reconnect.
Huawei
Need Huawei's adb tool to connect.
Skyworth
In Settings - More Settings, press the right key multiple times to trigger the USB switch, then click to enable USB debugging.
Fiberhome
Connect via serial cable.
ZTE
Need to send a QR code to the developer, then return the password, enable adb, can be used 40 times.
Anhui Telecom Skyworth E900 Ten times menu key + one volume up key.
ZTE
Long press the back key for ten seconds + one left key, select to open adb debugging on the pop-up adb permission page.
Fiberhome
Direct connection.
Hisense
Press numbers 1473692580 on the remote control to connect (if "missing port in specification" appears, add port: 5555).
Tianyi
Info key + number keys 2, 3, 2, 3, then direct connection.
Huawei
Connect via Huawei STB management tool (fill in STB IP: set-top box IP, password is the verification code (get verification code from set-top box remote control #2486#), connect, enable remote).
Digital Video
Cannot use adb, connect via serial cable.
Guangxi Telecom Skyworth E900-S Enter settings, select other settings, continuously press the right key to display the USB debugging switch.
Zhejiang Telecom Fiberhome HG680-J Direct connection.
Skyworth E900 Continuously press the right key in other settings to open USB debugging.
Huawei EC6108V9 Connect via Huawei STB management tool (allow remote debugging in more settings and get verification code and password in STB tool).
Xinjiang Telecom Skyworth E900 Enter advanced settings in the settings, continuously press the right key 6 times to display the USB debugging option, open it to connect.
Fiberhome HG680-KA (P60) #600498#, open the menu to hide, check ADB.
Skyworth
E900V210E (P60) Settings - Advanced Settings - continuously press the right key; then return to the application information page, check USB debugging.
Tianyi TY1208-Z, TY1608 #2323.
Ningxia Telecom ZTE B860AV1.1 Enter settings, find the open ADB button, open adb, adb connect IP.
ZTE B860AV1.1-T Enter settings, find the open ADB button, open adb, adb connect IP.
Tianyi (SCTY) TY1208-Z The set-top box comes with an infrared remote control, first press the info key, then press 2323.
Hisense
Press numbers 1473692580 on the remote control to connect.
Skyworth
Direct connection.
Tianyi TY1208-Z Connect via serial cable, enter in the serial port: start adbd to open adb.
TY1608 Connect via serial cable, enter in the serial port: start adbd to open adb.
Huawei EC6108V9 Connect via Huawei STB management tool (fill in STB IP: set-top box IP, password is the verification code (get verification code from set-top box remote control #2486#), connect, enable remote).
EC6108V9C Connect via Huawei STB management tool (fill in STB IP: set-top box IP, password is the verification code (get verification code from set-top box remote control #2486#), connect, enable remote).
EC6108V9I Connect via Huawei STB management tool (fill in STB IP: set-top box IP, password is the verification code (get verification code from set-top box remote control #2486#), connect, enable remote).
EC6108V9E Connect via Huawei STB management tool (fill in STB IP: set-top box IP, password is the verification code (get verification code from set-top box remote control #2486#), connect, enable remote).
Fiberhome HG680-YDR2H Direct connection.
HG680-YDR2Z Direct connection.
HG680 Click on version information multiple times to enter developer mode, open ADB service in advanced settings.
HG680-KA Click on version information multiple times to enter developer mode, open ADB service in advanced settings.
ZTE B860AV1.1 Connect via ZTE adb management tool (or contact ZTE manufacturer for on-site testing help).
Item number B860AV1.1T
Connect via ZTE adb management tool (or contact ZTE manufacturer for on-site testing help).
B860AV2.1-T Connect via ZTE adb management tool (or contact ZTE manufacturer for on-site testing help).
Hisense IP906H In the settings interface, press remote control 1473692580 to connect directly.
Liaoning Telecom Tianyi TY1208-Z Direct connection.
Skyworth E900S System Settings - Advanced Settings - Display Settings, continuously press the right key to open USB debugging.
ZTE B860AV1.1 Enter settings, open debugging, and perform adb connection.
Shandong Telecom ZTE B860AV1.1-T2 Long press the back key for 3 seconds, then press the left key.
Mobile
Province Manufacturer Set-top Box Model adb Connection Method
Yunnan Mobile Huashu M301H Enter other settings in settings, continuously press the right key on the remote control 6 times, the USB debugging option will appear, open it to connect.
Xinjiang Mobile Magic Box CM201-2 Use Chaoge swstbmgr.exe tool to connect to the set-top box, open adb, then connect directly.
CM101s Use Chaoge swstbmgr.exe tool to connect to the set-top box, open adb, then connect directly.
Fiberhome HG680-J Open adb, then connect directly.
Huawei EC6108V9 Find "More" in settings, select "Remote Maintenance Connection", choose "Allow", use STBMonitor tool to connect to the set-top box, open adb, then connect directly.
Baishitong R3300-L Cannot open adb.
Changhong CM201-2-CH Any interface, press up down left right left right then press four times confirm, pop up hidden settings page, select adb service, permanently open adb.
Yishiteng CM201-2 Provide MAC to the manufacturer, the manufacturer provides an encrypted file; save the encrypted file to the root directory of the USB drive, plug it into the USB port of the set-top box, open adb, adb connect IP: 5114.
Huawei Q21A_xjxyd Open adb with Huawei stb7.0 version tool.
ZTE B860AV1.1 Press the back key for four seconds, then press the left key once, pop up the open adb interface; after clicking to open adb, take a picture of the displayed QR code and send it to the manufacturer to get the password.
Zhejiang Mobile IoT M201-s Enter settings, open debugging on the network settings page, perform adb connection adb connect IP: 31015.
IoT HM201 Enter settings, open debugging on the network settings page, perform adb connection adb connect IP: 31015.
Yishiteng CM201-2 IP: 5114.
Yishiteng CM201z IP: 5114.
Chaoge CM301.
Chaoge tool opens adb, then connect directly.
The following command can permanently open adb for CM301.
adb shell
echo “adbd &” >>system/etc/init.sunniwell.sh.
Jiulian MGV2000
- Press 782782323 on the remote control (ensure each key is pressed) after pressing, can connect directly.
- Alternate pressing the yellow and green keys on the remote control.
Yunnan Mobile Langchao ipbs9505 Continuously press the key values "up down left right left right", port number 65432.
ZTE
Press and hold the back key for more than 2 seconds, then release and press the left key.
IoT m301h In the other settings interface, continuously press the right key on the remote control 6 times, pop up the USB debugging interface to open adb.
Huawei
Use STBLicenseTools to generate license.dat, open the tool for loading.
Open remote maintenance in the set-top box, a password will be generated, enter the box IP in the STB tool, enter the password in the password field.
After connecting, open the remote function in the lower right corner of the tool to log in to adb.
Shandong Mobile Chaoge CM201-2 Use the new version of Chaoge tool STBmanger to connect, first generate the machine code, then ask the manufacturer for the license, after successful connection, open adb connection in the debugging management item.
CM201-1 Up down left right 0816.
CM101s Use Chaoge tool swstbmgr to connect, first generate the machine code, then ask the manufacturer for the license, after successful connection, open adb connection in the debugging management item.
IoT M301H Latest rom version press up down up down left right menu pops up verification code input box, then feedback stbid and mac and model to the manufacturer, wait for the verification code to be provided, then input to connect adb.
Langchao IPBS9505 Press up down left right left right, port number 65432, can connect.
Changhong CM201-2 Press up down left right left right confirm confirm confirm confirm, can connect.
Jiulian UNT401H Direct connection, port 30016.
Fiberhome
Direct connection.
Huawei EC6108V9 Find "More" in settings, select "Remote Maintenance Connection", choose "Allow", use STBMonitor tool to connect to the set-top box, open adb, then connect directly.
EC6108V9C Find "More" in settings, select "Remote Maintenance Connection", choose "Allow", use STBMonitor tool to connect to the set-top box, open adb, then connect directly.
ZTE B860A Press and hold the back key for 3 seconds, then release and press the down key, pop up the background management, select to open adb, pop up the verification code input box, feedback mac and random number to the manufacturer, after providing the verification code, input to connect adb.
B860AV1.1 Press and hold the back key for 3 seconds, then release and press the down key, pop up the background management, select to open adb, pop up the verification code input box, feedback mac and random number to the manufacturer, after providing the verification code, input to connect adb.
B860AV2.1 Press and hold the back key for 3 seconds, then release and press the down key, pop up the background management, select to open adb, pop up the verification code input box, feedback mac and random number to the manufacturer, after providing the verification code, input to connect adb.
Henan Mobile Migu MG100 Use the manufacturer's provided updata.zip file placed in the USB drive's upgrade directory, plug it into the set-top box and wait for the set-top box to automatically update, after the update is complete, can connect directly.
Magic Box M101 Use the manufacturer's provided updata.zip file placed in the USB drive's upgrade directory, plug it into the set-top box and wait for the set-top box to automatically update, after the update is complete, can connect directly.
Jiulian MGV2000 Press 782782323 on the remote control (ensure each key is pressed) after pressing, can connect directly.
M301H Press the green yellow green yellow on the remote control to enter the background and open adb, when connecting adb add port number 30016.
Chaoge CM301 Use the new version of Chaoge tool STBmanger to connect, first generate the machine code, then ask the manufacturer for the license, after successful connection, open adb connection in the debugging management item.
CM201-2 (Chaoge) Use the new version of Chaoge tool STBmanger to connect, first generate the machine code, then ask the manufacturer for the license, after successful connection, open adb connection in the debugging management item.
CM101s Use Chaoge tool swstbmgr to connect, first generate the machine code, then ask the manufacturer for the license, after successful connection, open adb connection in the debugging management item.
Changhong CM201-2 Up down left right 0816.
IoT M301A_UM9_HN47 Continuously press on-demand + info key, until the hidden page pops up to open adb.
M301H_ZN0_HA47 Open adb with Chaoge STB tool.
M301H_U_HN Port number: 30016.
Migu MIGU MGV2000-U_HN Press 782782323 on the remote control (ensure each key is pressed) after pressing, can connect directly.
Yishiteng CM101s-2_HN Ask the manufacturer for the certificate, place it in the root directory of the USB drive and plug it into the set-top box, port number 5888.
Huawei EC6109M_hnyyd Huawei stb tool.
Skyworth E900V21E Ten times menu + one right.
ZTE B860AV2.1-A ZTE STB.
Skyworth CM201-1_CW Ten times menu + one right.
Baishitong CM201-1-YS Port number 5114.
Shanxi Mobile Yishiteng CM201-2.CH Direct connection, adb connect IP.
Baishitong CM201-2 Save the encrypted file to the root directory of the USB drive, plug it into the USB port of the set-top box, open adb, adb connect IP: 5114.
Galaxy CM201-2 Save the encrypted file to the root directory of the USB drive, plug it into the USB port of the set-top box, open adb, adb connect IP: 5114.
Fujian Mobile Newland NL-3680P Settings - About this machine - Machine information Confirm key ten times.
Terminal Company CM101s Terminal Company adb debugging tool opens.
Skyworth E900V21C Ten times menu plus one right key.
Jiangxi Mobile
Fusion Network Management SVG6000RW-M Unzip the adb tool to D drive - open cmd, enter D: press Enter - in the cmd window enter cd adb - the set-top box remote control alternately press menu plus volume up key - in cmd enter adb connect IP.
Migu (Konka OEM) MG101 Create an empty file konka_adb_open.txt, place it in the root directory of the USB drive.
CM201-2 (Chaoge OEM) Manufacturer opens.
Terminal Company CM201-2-YST (Yishiteng OEM) Provide MAC to the manufacturer, decryption file, add port 5114.
Yishiteng Yishibao-E5N Add port 5114.
IoT M301H (Digital Video OEM) Manufacturer opens.
IoT M301H (Jiulian OEM) Add port 30016.
Migu MIGU-JT-U2 (Yishiteng OEM) Provide MAC to the manufacturer, decryption file, add port 5114.
Terminal Company WS-D1F8-B04 (Yishiteng OEM) Add port 5114.
IoT M101 (Jiulian OEM) Direct connection.
Terminal Company WS-D1F8-B029 (Yishiteng OEM) Add port 5114.
Migu MIGU-JT-Y1 (Yishiteng OEM) Provide MAC to the manufacturer, decryption file, add port 5114.
Jiulian UNT400C Contact the manufacturer.
Migu MG101 (Yishiteng OEM) Provide MAC to the manufacturer, decryption file, add port 5114.
Terminal Company WS-D1F8-B02-S (Yishiteng OEM) Provide MAC to the manufacturer, decryption file, add port 5114.
ZTE ZXV10 (AV2.1) Contact the manufacturer, serial port.
Migu MIGU-JT-Y2 (Yishiteng OEM) Provide MAC to the manufacturer, decryption file, add port 5114.
Migu MG100 (Yishiteng OEM) Provide MAC to the manufacturer, decryption file, add port 5114.
This post contains hidden content.
Digital Video Q5
Terminal Company CM101S-2 (Yishiteng OEM) key, direct connection.
Fiberhome HG680-KA Contact the manufacturer.
Huawei EC6110-M Contact the manufacturer.
Terminal Company CM201-1 (Yishiteng OEM) Add port 5114.
ZTE ZXV10 B860AV2.1-A Contact the manufacturer, serial port.